10 User’s Manual
“READY” light (for all zones to close), use Force
“Away” arming. Open zones will not be protected, but
will be armed as soon as they are closed.
3.10 ARMING BOTH SYSTEMS SIMULTANEOUSLY
If your code has access to both systems:
3.11 ARMING SYSTEM A AND B SEPARATELY:
If your Access Code has access to System A:
If your Access Code has access to System B:
How do I Force Arm the system?
1) Press the [AWAY] button and then enter your User
Code.
The [AWAY] key will flash.
How do I Arm Systems A and B simultaneously?
1) Enter your Access Code.
The [STAY] AND [AWAY] key will flash. The “ready” light
will also begin to flash and the exit timer will begin to
countdown.
How do I arm System A?
1) Press the [STAY] key.
2) Enter your Access Code.
The [STAY] key will flash. The “ready” light will also
begin to flash and the exit timer will begin to count-
down.
To Next Page
Loading...
