Paradox Magellan Systems 5
When you are done the next menu option will appear. Press
[
NEXT
] until you see the “Passwords” menu or press the [8] key
to immediately access the “Passwords” menu.
6.Passwords
1. From the “Passwords” menu,
press [
OK
].
2. Select which password(s) or
code(s) you wish to program by
pressing [
NEXT
] and press [
OK
]
when the desired password
appears. The following
passwords can be programmed:
- Installer code
- Maintenance code
- Panel ID
- PC Password
When you are done the next menu option will appear. Press
[
EXIT
].
For more in-depth programming of the console’s
passwords, see User Codes on page 13 and WinLoad
Software Settings on page 37.
7.Time and Date
1. Press the [
MENU
] key.
2. Press [
NEXT
] until you reach the
“Time and Date” menu and press
[
OK
] or press the [3] key to
access the “Time and Date”
menu.
3. Select the time format (12Hr-
clock or 24Hr-clock) and then
program the time. Press [
OK
]
when done.Program the date by
entering the 4-digit year first,
followed by the 2-digit month and
then the 2-digit day. Press [
OK
]
when done.
Deleting Zones
1. From the “Zone Profile” menu, press
[
OK
].
2. Select which zone you wish to delete by
pressing [
NEXT
] and press [
OK
] when
the desired zone number appears.
3. Press [
YES
].
4. Press [
YES
]. To delete another zone,
press [
YES
] and then repeat steps 2 to
4.
When you are done the next menu option will appear. Press [
NEXT
] until
you see the “System Test” menu or press the
[5] key to immediately
access the “System Test” menu.
For more in-depth programming of the console’s zones, see
Zone Programming on page 14 and Wireless Programming on
page 18.
To Next Page
Loading...
