Paradox RTX3 User Manual

Programming Page 13
[2851]
to
[2858]
Learn Siren Press and hold the Reset/Training
switch for 3 seconds after entering the
section to learn the siren
WARNING: When pressing the Reset/
Training switch, the SR130/SR150
squawks and the strobe light flashes
five times to confirm siren registration
to the panel
[2861]
to
[2868]
Assign Partition to
Siren
Assign sirens to either one partition or
to all eight partitions.
00: Assigned to ALL 8 partitions
01-08: Assign to selected partition
[2871]
to
[2878]
Display Siren Signal
Strength
Press and hold the Reset/Training
switch for 3 seconds after entering the
section to display the siren signal
strength that the panel receives.
Requires keypad K32LCD V1.3 and
higher
[2870]
Temporary Siren
Tamper Switch
Deactivation for
Maintenance
Press
[ENTER] after entering the section
to deactivate tamper alarm until the
cover is reinstalled or after 30 minutes
Section Feature Details

Paradox RTX3 Specifications

General

Brand	Paradox
Model	RTX3
Category	Computer Hardware
Language	English