Page 12 Programming
[671] to
[678]
2WPGM Signal
Strength
Sections [671]-[678] correspond to
Zone inputs 1 - 8
Signal Strength:
• 3 or less: weak - move transmitter
• 4 to 10: OK
[901] to
[908]
Assign 2WPGMs Sections [901]-[908] correspond to
Zone inputs 1 - 8
To assign 2WPGMs:
Enter a 6-digit serial number or press
and release the transmitter’s tamper
switch
To delete an assigned 2WPGM:
Enter 000000 as a serial number
Note: If a section between [901] to [904]
is empty, the RTX3 uses the on
board PGM
[910] to
[989]
PGM Programming
To program Two-Way PGM activation
event, deactivation event and PGM
Delay options, see
RTX3 PGM Options for
EVO
on page 14
[991]
View two-way PGM
Tamper Trouble
PGM # in tamper trouble is displayed
[992]
View two-way PGM
Supervision Trouble
PGM # in supervision trouble is
displayed
[2850] Assign RTX3
Assign the RTX3 that the sirens will be
configured to
Note: The following programming sections correspond to sirens 1-8
EXAMPLE: [2852]: Learn Siren 2
Section Feature Details
To Next Page
Loading...
Need help?
General
