2928
9.1 REPLACING THE LENS
9.3 OTHER SPARE PARTS
If the lens is damaged you can buy a Paralenz Lens Kit. To
replace the lens: 1) Unscrew the lens lock ring by rotating it
counter clockwise. 2) Loosen the front lens with your fingers.
3) Apply grease that does not contain silicone around the
O-rings on the new lens. 4) Insert the new lens while rotating
slightly.
For other spare parts please contact support@paralenz.com
4
9. REPLACING PARTS
9.2 REPLACING THE O-RINGS ON THE LENS
If the O-rings are damaged you can replace them: 1)Unscrew
the lens lock ring. 2) Replace the O-ring with the extra O-ring
that came with your camera. Remember to apply grease that
does not contain silicone.
Make sure that the O-rings are aligned and lubricated. If they
are misplaced or dried out the camera will be flooded.
1 2
3
1 2
To Next Page
Loading...