38
1 7. PRECAUTIONS
To avoid malfunction, explosion, or fire:
Do not microwave, open, drop, puncture, take apart, bend,
crush, paint, or incinerate the camera.
Do not solder or glue parts onto the camera and do not insert
foreign objects into any openings, such as the Micro USB port.
Do not use the camera if it is damaged, this includes a punc-
ture, missing O-ring, or water inside and do not attempt to
remove or change the battery.
Do not dry the camera in an oven, with a hairdryer or any other
external heat source, especially open fire.
Do not use the Paralenz Dive Camera for dives deeper than
200M/556F/21 ATM.
When opening and charging the camera, make sure that your
hands are not wet, and that water from other sources cannot
enter the camera or charger. This may cause electrical shock.
The Paralenz Dive Camera should not in any way be used as a
dive computer, or as a supplement to a dive computer.
When charging, make sure the charger is a USB type charger,
of max 5V, or use a USB plug on a computer.
If the front lens on the Paralenz Dive Camera should break,
take care to avoid injury. Keep out of reach of children.
Waterproof to 200 M/656 FT./21 ATM.
Video resolution 4k-30 fps / 1080p-100 fps / 720p-240 fps
Still resolution 8 MP
White balance Auto, 3500K, 5000K, 6500K + DCC™ (switch between WB and DCC™)
Battery life LiPo – 1600 mAh / 3+ hours recording (1080 p – 30 fps)
EIS - Electronic image
and tilt stabilization
Will be available soon through firmware update
App Viewing / Sharing / Settings (iOS & Android)
Usable with gloves Yes
Shockproof Yes
Lens / lens distortion
correction
140° / lens distortion correction will soon be available through firmware
update
Weight 155 g (5.5 oz)
Dimensions 116 x 35 x 38 mm (4.5 x 1.4 x 1.5”)
Housing Military grade aluminum & polycarbonate
Audio recording Yes (internal microphone)
Port USB-C (for fast charging)
Storage 128 GB micro SD-card max. (Class: U3 or V30) – not included
Mounts Mask Mount & Universal Mount included
Dive log video overlay Yes
Connectivity WiFi, Bluetooth & USB
Display 0.5” OLED
Operating temperature
-20°C to 85°C / -4°F to 185°F / EVA padding (minimizing battery
discharge in cold water)
Extra casing needed No
Sensors Pressure / temperature
16. SPECIFICATIONS
39
To Next Page
Loading...
