Appendix E: Boe-Bot Parts Lists · Page 319
Building a Boe-Bot with a HomeWork Board
If you already have a BASIC Stamp HomeWork Board that you wish to use with a Boe
Bot, you will need the Robotics with the Boe-Bot Parts kit and these additional items:
(2) 3-pin male/male headers, #451-00303
(1) Tinned-lead battery pack, #753-00001
Boe-Bot Hardware Pack
All of the Boe-Bot hardware parts can be purchased individually, as found in our on-line
Robot Component Shop if you find you need a replacement part. Please note that the
Hardware Pack is not sold as a unit separately from the Boe-Bot Robot (Full) Kit or the
Boe-Bot Parts Kit.
Table E-3: Boe-Bot Hardware Pack (#28133)
Parts and quantities subject to change without notice
Parallax
Stock Code
Description Quantity
700-00002 4-40 x 3/8”machine screw, Phillips 8
700-00003 Hex nut, 4-40 zinc plated 10
700-00009 Tail wheel ball 1
700-00016 4-40 x 3/8” flathead machine screw, Phillips 2
700-00022 Boe-Bot aluminum chassis 1
700-00023 1/16" x 1.5” long cotter pin 1
700-00025 13/32" rubber grommet 2
700-00028 4-40 x 1/ 4” machine screw, Phillips 8
700-00038 Battery holder with cable and barrel plug 1
700-00060 Standoff, threaded aluminum, round 4-40 4
721-00001 Parallax plastic wheel 2
721-00002 Rubber band tire 4
900-00008 Parallax Continuous Rotation Servo 2
To Next Page
Loading...
Need help?
General