Pari Compact - Preparation

- 12 -
3.2 Preparation
Check the compressor housing, ...1
Check the compressor housing, the power cord and the power plug
for damage every time before using. Make sure that the local supply
voltage complies with the voltage data marked on the compressor
identification label. Only use the compressor if all components are
intact. The compressor must not be operated if the device or the
power cord is damaged, or if damage is suspected (e.g., after it has
fallen or if there is a smell of burning plastic).
Prepare the device ...
Prepare the device for an inhalation session as follows:
• Assemble the nebuliser as described in the instructions for use
of the nebuliser.
• Attach one end of the connection tubing to the nebuliser.
Check carefully, ...
• Insert the nebuliser in the holder on the compressor intended
for this purpose.
• Attach the other end of the connec-
tion tubing to the compressor.
The tube connectors can be insert-
ed more easily if they are twisted
slightly when inserting.
WARNING
Check carefully whether the other end of the PARI connection
tubing connected to the compressor is connected to the PARI
nebuliser.
When several tubing systems are present, there is a possible
danger of death if different connection options are confused
with each other. This applies particularly in the case of patients
in need of constant care who must receive artificial nutrition or
other infusion treatments.