- 15 -
en
4 MAINTENANCE
4.1 Cleaning the compressor
Liquids can conduct, ...1
Liquids that get into the device ...
If liquid does get into ...
If liquid does get into the compressor, the device must not be
used under any circumstances. Before using the compressor
again, you must contact the PARI GmbH Technical Service de-
partment or the PARI Service Center [See also: 7.4 Contact].
In order to clean ...
In order to clean the nebuliser, the connection tubing and the ac-
cessories, follow the notes in the respective instructions for use.
WARNING
Liquids can conduct electricity, thereby posing a risk of electric
shock. Therefore, always switch the compressor off and discon-
nect the power plug from the mains socket before starting to
clean it.
• Wipe the outer surface of the
housing with a clean, damp cloth.
NOTICE
Liquids that get into the device can cause a fault in the de-
vice. Therefore, never spray any liquids onto the compressor or
the power cord.
To Next Page
Loading...
