Pari Compact - Performing the Inhalation

- 13 -
en
• Fill the nebuliser as described in the instructions for use of the
nebuliser.
Liquids can conduct, ...2
3.3 Performing the inhalation
To avoid overheating ...
To avoid overheating the compressor, never place a cover over the
device during operation, and ensure that the side ventilation slits are
not obstructed. If the compressor is covered or if the ventilation slits
are blocked, the compressor cannot be cooled properly.
WARNING
Liquids can conduct electricity, thereby posing a risk of electric
shock. Therefore, never take hold of the power cord or the pow-
er plug with damp or wet hands.
• Connect the power cord to the pow-
er cord socket of the compressor.
• Plug the power plug into a suitable
socket.
• Before starting the treatment, pull
the nebuliser out of the holder.