Bulletin HY25-1135-M1/US
Owner’s Manual
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA
19
Wire Shift PTO
6 and 8-Bolt PTOs
Cable Control Installation Instructions* (Continued)
11. Push the wire back through and install the cable using the hardware from the previously mentioned
wire control parts bag (328380X).
12. Cut the excess wire after the cable casing and wire have been installed and tightened.
*All six bolt wire shifts with the exception of the reversible, dual shift units, and some gear boxes.
8
7
9
To Next Page
Loading...
