Bulletin HY25-1135-M1/US
Owner’s Manual
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA
21
15A
2
15C
1
15B
Wire Shift PTO
6 and 8-Bolt PTOs
Cable Control Installation Instructions (Continued)
(Reversibles, dual shift units, and some gear boxes)
1. Use steps #1-#5 from previous instructions.
2. In step #6 the cable can come from either direction since the PTO will always be engaged when all
the way in or out.
3. Follow step #7 and #8.
4. In step #9 shift the PTO from forward to reverse or vice versa to determine the amount of travel
needed and the length of casing to be cut.
5. Follow step #10-#14.
6. Step #15 will show the folding:
CABLE IN: PTO ENGAGED: LIGHT ON [15A]
CABLE OUT (1st position): PTO DISENGAGED: LIGHT OUT [15B]
CABLE OUT (2nd position): PTO ENGAGED: LIGHT ON [15C]
328346-10X Wire Control Cable
Shift Assembly
Dash Wall or Optional Floor Location
To Next Page
Loading...
