What to do if my Parker DME012-RX Dehumidifier has a high differential pressure?
If your Parker Dehumidifier shows a high differential pressure, the cause might be excessive outlet flow. Check and regulate the air demand to resolve this issue.
Why is my Parker DME012-RX's outlet air flow stopping?
If the outlet air flow of your Parker Dehumidifier stops, this could be due to an electrical fault or a blown fuse in the plug. In such cases, contact customer services.
How to troubleshoot poor dewpoint in Parker DME012-RX?
If your Parker Dehumidifier has a poor dewpoint, several factors could be responsible: * Entrained water. * Excessive airflow demand. * Inlet pressure too low. * Excessive inlet air temperature. * Insufficient purge airflow. * Blocked exhaust silencers. * Contaminated desiccant. To address these issues: * Check pre-filtration drains. * Compare the actual flow against the dryer's rated flow. * Check for recent additions to the air system. * Check against the technical specification. * Ensure the system pressure is at the factory setting of 6 bar g (87 psig). * Eliminate the source of contamination.
What to do if Parker DME012-RX Dehumidifier constantly depressurizes?
If your Parker Dehumidifier is constantly depressurizing, the cause might be a damaged valve. In such cases, contact customer services.
Why is my Parker Dehumidifier failing to purge?
If your Parker Dehumidifier is failing to purge, it could be due to a blocked or shut purge valve or blocked exhaust silencers. In such cases, contact customer services.
How to fix an electrical fault in Parker DME012-RX Dehumidifier?
If your Parker Dehumidifier has an electrical fault, this could be due to a hardware fault. In such cases, contact customer services.
General| Category | Dehumidifier |
|---|---|
| Model | DME012-RX |
| Capacity | 12 liters/day |
| Power Supply | 220-240V, 50Hz |
| Power Consumption | 210W |
| Water Removal Technology | Compressor |
| Weight | 11 kg |
| Operating Temperature | 5°C to 35°C |
To Next Page