Parker DME012-RX - 3 Installation & Commissioning; Locating the Equipment

11
DME012-RX - DME080-RX
3. Installation & Commissioning
Warning
Only competent personnel trained, qualified, and approved by domnick hunter should perform installation,
commissioning and service procedures.
3.1 Locating the equipment
Identify a suitable location for the equipment taking into consideration the minimum space requirements for maintenance and lifting
equipment as shown in the diagram below. When considering the final location of the equipment take into account the noise generated
when in use.
The dryer can be free standing or secured to the floor via the fastener points provided in the base.
±2°
50% @ 40
o
C
(80% MAX ≤ 31
o
C)
+45
o
C
+5
o
C
500 CRS
A
A
B
B
ECO
ECO
A
A
B
B
ECO
ECO