Need help?Do you have a question about the Parker CDAS HL 050 and is the answer not in the manual?
General| Brand | Parker |
|---|---|
| Model | CDAS HL 050 |
| Category | Dehumidifier |
| Language | English |
Instructions for safe operation and user responsibilities.
Explanation of safety and warning symbols used in the manual and on equipment.
Guide to understanding the nomenclature of dryer model numbers.
Guidelines for handling and preparing the dryer upon delivery.
Description of the CDAS series dryers and their purification stages.
Description of the OFAS series dryers and their purification stages.
Description of the FBP series dryers and their purification stages.
Identification and description of components for CDAS HL models.
Identification and description of components for OFAS HL models.
Identification and description of components for FBP HL models.
A comprehensive checklist for commissioning the dryer.
Guidance on optimal system configuration for dryer installation.
Environmental and space requirements for locating and installing the dryer.
Instructions for mounting the rear panel for easier access.
Procedures for physically securing the dryer and attaching the silencer.
Procedure for setting the correct purge air volume for efficient regeneration.
Guidelines for connecting the dryer's electrical supply.
Initial configuration of the dryer controller's basic settings.
Configuring inlet valve operation and temperature display units.
Configuration steps for advanced controller functions.
General explanation of how the adsorption dryer works.
Details on the dryer's operational cycles and timing.
Explanation of EST and Purge Economy energy saving features.
In-depth explanation of the Energy Saving Technology operation.
Description of Moisture Override and Purge Economy operational modes.
Overview of the dryer's electronic controller and display capabilities.
Explanation of the various displays and status indicators on the dryer.
Interpretation of icons used on the dryer's display screen.
Step-by-step instructions for starting up and shutting down the dryer.
Visual representation of the dryer's operation during a typical cycle.
How alarm conditions are indicated on the dryer display.
Guidelines for cleaning the dryer equipment.
Recommended schedule for routine maintenance tasks.
Catalogue numbers and recommended service intervals for CDAS HL kits.
Catalogue numbers and recommended service intervals for OFAS HL kits.
Catalogue numbers and recommended service intervals for FBP HL kits.
Contents of the 12-month preventative maintenance kits.
Contents of the 60-month preventative maintenance kits.
Key performance metrics including dewpoint and ISO classifications.
Operating parameters, pressure, temperature, and flow rate data.
Factors and formulas for selecting and sizing the correct dryer.
Specifications for power supply, humidity, IP rating, and altitude.
Compliance with relevant safety and EMC standards.
Verification of performance by external bodies.
Physical dimensions and weight specifications for CDAS HL models.
Physical dimensions and weight specifications for OFAS HL models.
Physical dimensions and weight specifications for FBP HL models.
Identifying and resolving issues related to dewpoint failure.
Diagnosing and fixing problems causing a loss of outlet dewpoint.
Identifying and resolving issues causing a high pressure drop.
Troubleshooting loss of system pressure due to air supply interruption.
Manufacturer's declaration of compliance with UK regulations.
Manufacturer's declaration of compliance with EU directives.
Manufacturer's declaration for FBP models under UK regulations.
Manufacturer's declaration for FBP models under EU directives.
To Next Page