Parker F1 Series Installation And Start-Up Information

12
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Hydraulic Motors
Series F1/F2/T1
Bulletin HY30-8201-INST/EU
Position notification regarding Machinery Directive 2006/42/EG:
Products made by the Pump and Motor Division (PMD) of Parker Hannifin are excluded
from the scope of the machinery directive following the “Cetop” Position Paper on the
implementation of the Machinery Directive 2006/ 42/ EC in the Fluid Power Industry.
All PMD products are designed and manufactured considering the basic as well as the
proven safety principles according to:
•฀SS฀EN฀ISO13849-2:2008-09,฀C.2฀and฀C.3฀and,฀
•฀SS฀EN฀982+A1:2008,฀
so that the machines in which the products are incorporated meet the essential health and
safety requirements.
Confirmations for components to be proven component, e. g. for validation of hydraulic
systems, can only be provided after an analysis of the specific application, as the fact to be
a proven component mainly depends on the specific application.
Dr. Hans Haas
General Manager Pump and Motor Division Europe
Chemnitz, Chomutov, Trollhättan, Kingswinford
Declaration
Parker Hannifin Manufacturing Sweden AB HY30-8201-INST/EU
Pump and Motor Division Art. No 3782132-09
SE-461 82 Trollhättan
Sweden © Copyright 2013
Tel.฀+46฀(0)520฀40฀45฀00฀All฀rights฀reserved
Fax฀+46฀(0)520฀371฀05
www.parker.com/euro_pmd

Parker F1 Series Specifications

General

Brand	Parker
Model	F1 Series
Category	Water Pump
Language	English