Industrial Automation Wiring and Grounding Guidelines E115P
15
• National Electrical Code (ANSI/NFPA 70) — Article 250
of this code provides information about the types and
sizes of conductors and methods for safely grounding
electrical equipment and components. Articles 725-5,
725-15, 725-52, and 800-52 restrict the placement of
different types of conductors in a composite cable, a
raceway, or a cable tray.
• IEEE Recommended Practice for Grounding of Industrial
and Commercial Power Systems (IEEE Std 142-1991)
• Grounding for the Control of EMI (by Hugh W. Denny —
publisher, Don White Consultants Inc., 1973)
• Electromagnetic Interference and Compatibility, Volume
3 (by R. J. White — publisher, Don White Consultants,
Inc., 1981)
• Military Handbook 419, “Grounding, Bonding, and
Shielding for Electronic Equipment and Facilities”
• IEEE Guide for the Installation of Electrical Equipment
to Minimize Electrical Noise Inputs to Controllers from
External Sources (IEEE Std 518-1982)
• IEEE Recommended Practice for Powering and
Grounding Sensitive Electronic Equipment (IEEE Std
1100-1992)
To Next Page
Loading...
