Parker H Series - Chapter Summary; Guidelines for Using Your Adapter

Publication PSS-UM001A-EN-P – December 2016
6-2 Troubleshoot the H Series Fieldbus DeviceNet Adapter
Guidelines for Using Your Adapter
Remember the following operational guidelines when using your
H Series Fieldbus DeviceNet adapter.
• Do not leave spaces in the I/O. Instead, install all H Series
Fieldbus I/O modules adjacent to each other.
• Populate every position on the mounting base.
• Do not add new I/O modules to the end of the H Series
Fieldbus I/O system while the system is under power.
• Use labels with the I/O modules.
• Do not move I/O modules to different locations on the
mounting base after they have been installed and confi gured.
•
If adjacent modules (i.e., 2 or more) are removed, replace all
of them to operate the H Series Fieldbus I/O system. Input
data will hold last state until all previously removed modules
are replaced.
Chapter Summary
In this chapter you learned how to troubleshoot your
adapter.