Parker H Series - Page 284

Publication PSS-SG001A-EN-P – June 2005
Mounting the Isysnet System
You can panel mount the Isysnet system in the horizontal or
vertical orientation.
Isysnet with PSSCDM12A, PSSCDM18PA, PSSCCNA,
PSSCENA, PSSCPBA Mounting Dimensions
Inches
(mm)
Adapter
2.0
(50)
2.0
(50)
1.9
(47.2)
4.02
(102)
1.81
(46)
4.32
(109.8)
5.39
(137.0)
Drill and Tap
for M4 Screw
2.39
(60.7)
3.02
(76.6)
3.13
(79.4)
5.98*
(151.9)
0.87
(22)
Drill and Tap
for M6 Screw
16 Isysnet
* Depending on the type and number of manifolds, this dimension
may vary. Refer to Catalog 0600P-# for additional information.