Publication PSS-UM001A-EN-P – December 2016
Related Products and Documentation
The following table lists related H Series Fieldbus I/O products and documentation:
If you need more information on these products, contact your local
distributor, integrator or sales offi ce for assistance.
Guidelines for Using Your Adapter
Remember the following operational guidelines when using your H
Series Fieldbus DeviceNet adapter.
• Do not leave spaces in the I/O. Instead, install all H Series
Fieldbus I/O modules adjacent to each other.
• Populate every position on the mounting base.
• H Series Fieldbus does not support removal and insertion
under power (RIUP). When an I/O module is removed, the
IP67 seal is broken and the backplane bus is interrupted.
4 Preface
Description Catalog Number Publication
H Series Fieldbus Serial Bus System Selection Guide N/A PSS-SG001
H Series Fieldbus 32 Point Valve Driver Installation Instructions PSSV32A E100P
H Series Fieldbus DeviceNet Adapters Installation Instructions PSSCDM12A, PSSCDM18PA E101P
H Series Fieldbus DeviceNet Adapter User Manual PSSCDM12A, PSSCDM18PA PSS-UM001
H Series Fieldbus PROFIBUS Adapter Installation Instructions PSSCPBA E102P
H Series Fieldbus PROFIBUS Adapter User Manual PSSCPBA PSS-UM002
H Series Fieldbus ControlNet Adapter Installation Instructions PSSCCNA E103P
H Series Fieldbus ControlNet Adapter User Manual PSSCCNA PSS-UM003
H Series Fieldbus EtherNet/IP Adapter Installation Instructions PSSCENA E104P
H Series Fieldbus EtherNet/IP Adapter User Manual PSSCENA PSS-UM004
H Series Fieldbus I/O 24VDC Expansion Power Supply Installation Instructions PSSSE24A E105P
H Series Fieldbus 24VDC Input Modules Installation Instructions PSSN8, PSSP8 E106P
H Series Fieldbus 24VDC Output Modules Installation Instructions PSST8 E107P
H Series Fieldbus Relay Output Modules Installation Instructions PSSTR4M12A E109P
H Series Fieldbus 24VDC Analog Input Modules Installation Instructions PSSNA E110P
H Series Fieldbus 24VDC Analog Output Modules Installation Instructions PSSTA E111P
H Series Fieldbus RS232 ASCII Module Installation Instructions PSSS23A E112P
Industrial Automation Wiring and Grounding Installation Instructions N/A E115P
Safety Guidelines for the Application, Installation and Maintenance of N/A E116P
Solid State Control
Conventions Used In This Manual
The following conventions are used throughout this manual:
• Bullet lists (such as this one) provide information, not
procedural steps
• Numbered lists provide sequential steps
• Text written like this identifi es screen, menu, toolbar names,
fi eld names, buttons, and check boxes on screens
• A menu item in this format File>Save identifi es the submenu
item after the caret (>) that is accessed from the main menu
(name before the caret)
• Pictures of symbols and/or screens represent the actual
symbols you see or the screens you use
To Next Page
Loading...
