Publication PSS-UM001A-EN-P – December 2016
Add the H Series Fieldbus DeviceNet Adapter to the DeviceNet Scanner's Scanlist 5-3
Parameters window
Restore all parameter
default values.
For a description of a
specific parameter,
highlight the parameter
below and click here.
Any parameter with a
lock shown before it
cannot be changed.
The values correspond
to the I/O connection
sizes from the I/O Data
window. They can be
uploaded from an
adapter with a
downloaded scanlist.
The following screens show how to change
the other parameters.
Auto Start Mode
Enable or disable autoaddress.
AutoAddress
Confi gure backplane modules to autobaud.
Backplane Autobaud
Choose the autoaddress.
AutoAddress Backplane Modules
Backplane Baudrate
Set the backplane baudrate.
IMPORTANT
The following confi guration parameters:
• Auto Start Mode
• Set Backplane Baudrate
• Set Backplane Autobaud
• AutoAddress Backplane Modules
should only be used when on line and should be set to Do
Nothing when Download All Parameters is selected or when
saving to a scanner’s ADR data.
To Next Page
Loading...
