Parker H Series - Page 336

Publication PSS-UM001A-EN-P – December 2016
4 Index
S
scanner
adding I/O modules to network ............................ 4-1
adding to network ................................................. 4-1
confi guration overview ......................................... 4-1
data alignment ..................................................... 4-4
expected packet ratesetting ................................. 4-3
foreground to background poll ratio ...................... 4-3
going on line ......................................................... 4-6
interscan delay ..................................................... 4-3
setting parameters ............................................... 4-2
settings in RSNetWorx for DeviceNet ..................4-4
transmit retries ..................................................... 4-3
self-test
of adapter when power applied ............................ 2-4
set backplane baudrate ............................................ 2-2
set backplane I/O module address ......................... 2-2
set node address ...................................................... 1-1
set subnet baudrate ................................................. 2-2
set subnet I/O module address ............................... 2-2
software
Confi guring scanner subnet ................................. 4-1
confi guring the adapter for DeviceNet .................. 5-1
RSNetWorx for DeviceNet ..............P-1, P-3, 2-4, 3-4
specifi cations ............................................................A-1
status indicators ....................................................... 6-1
strobe ........................................................ P-3, 2-3, 2-10
strobe connection produce size ............................. 2-6
subnet
confi gure I/O ........................................................2-2
set I/O module address ........................................ 2-2
understanding ...................................................... 2-3
subnet baudrate
setting .................................................................. 2-2
subnet network ......................................................... 2-3
T
terminal marking kits ...............................................P-4
terms defi ned ............................................................P-3
terms used in manual ...............................................P-3
transmit retries ......................................................... 2-7
scanner setting in RSNetWorx for DeviceNet ......4-3
troubleshooting
using status indicators ......................................... 6-1
U
updating adapter fi rmware
using the ControlFlash utility ................................P-3
using diagnostic tables .......................................... 2-11
using the adatpers
guidelines .............................................................P-4
W
wire the adapters ...................................................... 1-3
word boundaries ....................................................... 3-2