Parker H Series - Page 69

H Series Fieldbus Relay Output Module, Series A (PSSTR4M12A) E109P
6
If your RSLogic 5000 is Version 15.X or greater:
 •Choose the PSSTR4M12A module from the list of Parker
modules.
 •EnteranameandclickOK.
 •NoticethatthePSSTR4M12AisnowundertheI/Oconguration.
Add Relay Output Module to RSLogix 5000
I/OConguration
To add your relay output module to RSLogix 5000 I/O configuration,
follow these steps:
 •InRSLogix5000:
- For ControlNet, highlight the PSSCCNA or 1738-ACNR
(Shown), right click and select New Module.
- For EtherNet/IP, highlight the PSSCENA or 1738-AENT
(Shown), right click and select New Module.