Parker H Series - Page 85

H Series Fieldbus 24 VDC Analog Output Modules, Series A (PSSTACM12A, PSSTAVM12A) E111P
6
If your RSLogic 5000 is Version 15.X or greater:
 •Choose the PSSTACM12A module from the list of Parker
modules.
 •EnteranameandclickOK.
 •NoticethatthePSSTACM12AisnowundertheI/Oconguration.
Add Analog Output Modules to RSLogix
5000I/OConguration
To add your analog output modules to RSLogix 5000 I/O configuration,
follow these steps:
 •InRSLogix5000:
- For ControlNet, highlight the PSSCCNA or 1738-ACNR
(Shown), right click and select New Module.
- For EtherNet/IP, highlight the PSSCENA or 1738-AENT
(Shown), right click and select New Module.