Parker H Series - Page 92

H Series Fieldbus I/O RS-232 ASCII Module, Series A (PSSS23A) E112P
5
 • Enter a name (optional), slot number, and comm. format. Make
sure to choose Compatible Module for Electronic Keying
setting.
 •ChooseNext to set RPI.
 •ChooseFinish. Notice that the RS-232 ASCII module is now
under the I/O configuration
Add RS-232 ASCII Module to RSLogix 5000
I/OConguration
To add your RS-232 ASCII module to RSLogix 5000 I/O configuration,
follow these steps:
 •InRSLogix5000:
- For ControlNet, highlight the 1738-ACNR, right click and select
New Module.
- For EtherNet/IP, highlight the 1738-AENT, right click and select
New Module.
 •Choose the equivalent Rockwell Automation module
1738-232ASCM12 from the list of modules.