Parker Hannifin Corporation
Hose Products Division
Wickliffe, OH
16
Technical Manual
Karrykrimp
Bulletin 4480-T30-US
Maintenance
Maintenance
• Check hydraulic oil level every 40 hours of operations.
• If oil is needed, use Enerpac oil for Enerpac pumps, use ISO grade 46 oil for 85C-VEP2 pump.
• Drain and refill the reservoir every 1000 hours of operation.
• Check the crimp bowl weekly for signs of wear.
• Clean the crimp bowl of old grease on a weekly basis. Re-grease the crimp bowl after the bowl has been
cleaned.
• Apply approved MOLY-GRADE lithium grease to the dies and crimp bowl each time the dies are changed. If
dies are not changed through a day’s operation, grease should be applied twice a day.
www.comoso.com
To Next Page
Loading...
