Parker Hannifin Corporation
Hose Products Division
Wickliffe, OH
9
Technical Manual
Karrykrimp
Bulletin 4480-T30-US
Tool Selection Chart
(place hose
decal here)
Fittings
Hose/Die Selection and Crimp Diameters PN: PK1/KK MASTER DECAL 01/09
– 4
RED
– 5
PUR
– 6
YEL
– 8
BLU
– 10
ORG
– 12
GRN
– 16
BLK
– 20
WHT
Die Ring
80C-A04
80C-A05 80C-A06 80C-A08 80C-A10 80C-A12 80C-A16 80C-A20
43 Series
0.645
0.665
0.710
0.730
0.825
0.845
0.945
0.965
1.060
1.080
1.245
1.265
1.590
1.610
1.970
1.990
Silver
0.685
0.705
0.750
0.770
0.865
0.885
0.985
1.005
1.100
1.120
1.285
1.305
1.630
1.650
2.010
2.030
Black
80C-E04
80C-E05 80C-E06 80C-E08 80C-E10 80C-E12 80C-E16
26 Series
0.460
0.480
0.520
0.540
0.575
0.595
0.670
0.690
0.805
0.825
0.915
0.935
1.175
1.195
Silver
0.500
0.520
0.560
0.580
0.615
0.635
0.710
0.730
0.845
0.865
0.955
0.975
1.215
1.235
Black
80C-V12
80C-V16 80C-V20
81
Series
1.155
1.175
1.450
1.470
1.740
1.760
Silver
80C-H585
80C-H735 80C-H840 80C-H970 80C-H1120
HY Series
0.575
0.595
0.725
0.745
0.830
0.850
0.960
0.980
1.110
1.130
Silver
8
0C-H605 80C-H775 80C-H885 80C-H1010 80C-H1170
0.635
0.655
0.805
0.825
0.915
0.935
1.040
1.060
1.200
1.220
Black
Caution: Read the operations and technical manual
before attempting to operate this machinery. Do not
operate this machine without guard in place. Keep
hands clear of moving parts when operating machine.
Parker Hannifin Corp.
Hose Products Divison
30240 Lakeland Blvd.
Wickliffe, Ohio 44092
NOTE: Do not use these machines
to assemble 341-20, 451TC-20, 451ST-20
or any size stainless steel fittings.
PN: PK1/KK HOSE DECAL
Hose 01/09
Die
351TC
351ST
422
424
426
431
436
451TC
451ST
471TC
471ST
472TC
482TC
482ST
421WC
302/301
301LT
304
341
381
601
604
881
Die
213 285 293
201
206
221FR
225
244
266
CAH
SS25UL
Die
811 811HT 881
Die
AX
Die
BXX
Notes:
This chart is displayed on the front of the Karrykrimp machine.
The dies listed are interchangeable between all of the Parkrimp machines. The die rings are not interchangeable
between machines. Use only 82C-R01 and 82C-R02 die rings on the Karrykrimp machine.
For a complete selection of hose and fittings, see Parker Catalog 4400.
Caution: To ensure consistent quality, crimp diameters must be checked:
1. After first assembly
2. At regular intervals during the production, such as first, last and every 50th assembly.
If you find your crimp diameters out of tolerance, inspect each assembly made. Never allow hose assemblies with
an incorrect crimp diameter to be used. Use the appropriate Parker Machine Trouble Shooting Guide to determine
the cause. If you are unable to determine the cause of the problem, call our Hose Products Division Technical
Services Department at (440) 943-5700, for assistance.
Additional Hose Die Selection Charts are available upon request from your Parker supplier.
For Reference Only
www.comoso.com
To Next Page
Loading...
