Appendix A : PowerStation Specifications Testing Specifications
PA PowerStation User Guide A -7
Testing Specifications
The PA PowerStation conforms to the testing specifications listed below.
Table A-9, shows the European community immunity and emission
standards for electronic equipment: EN61000-6-2 (2001) and EN55011
(A2:2002).
Table A-9: European Community Specifications
Table A-10, shows the mechanical testing specifications.
Table A-10: Mechanical Testing Specifications
Test Specification
ESD immunity EN61000-4-2
RF immunity EN61000-4-3
Electrical fast transient/burst EN61000-4-4
Surge immunity EN61000-4-5
RF common mode immunity EN61000-4-6
Power frequency magnetic field immunity EN61000-4-8
Voltage dip and interrupt immunity EN61000-4-11
Conducted & radiated emissions EN55011
Test Specification
Surge withstanding capacitance EN61000-4-5
ESD requirements EN61000-4-2
Electrical fast transient EN61000-4-4
Operating vibration 0.5 grms/MIL-STD-810F 514.3
Mechanical shock IEC-68-2-27/MIL-STD-810 516.3
Non-operational vibration 1.0 grms/MIL-STD-810F 514.3
To Next Page
Loading...
