28 29
It is important that the 3 tooth blade sits correctly on washer “A” and not in an off-centered position. Having
the 3 tooth blade installed incorrectly can cause excessive vibration and premature damage to the lower shaft
and the blade itself. It can also be incredibly dangerous to the user and any bystanders nearby the work area.
PLEASE FOLLOW THE INSTALLATION GUIDE CAREFULLY! - INSTALLING THE 3 TOOTH BLADE
INSTALLING THE 3 TOOTH BLADE - PLEASE FOLLOW THE INSTALLATION GUIDE CAREFULLY!
Install washer “A” as illustrated above. Align the
hole in the washer with the hole in the spool collar.
This is to help you lock the hub with an allen key
later on in the process.
Place the three tooth blade so the centre hole sits
on the protrusion on washer “A”.
Above is an image of the 3 tooth blade seated in the
correct position on the protrusion on washer "A".
1
INSTALL WASHER 'A'
2
Install washer “B” as illustrated. Washer "B" sits on
top of the three toothed blade.
ATTACH 3 TOOTH BLADE
3
INSTALL WASHER 'B'
• Please be aware that Washer "A", "B", "C" and the Hub Nut may come pre-installed on the hub of the machine.
• Always remove the 3 tooth blades protective cover before use.
• Ensure the 3 tooth blade is installed correctly, not doing so will damage the machine.
• Using the 3 tooth blade whilst installed incorrectly is dangerous and could potentially cause serious injury.
WARNING!
ENSURE BLADE IS INSTALLED CENTRALLY
ON RAISED AREA OF WASHER ‘A’
To Next Page
Loading...