32
INTRODUCTION
CONTENTS
This manual has been produced by Parker Products Ltd. and should
be kept with the product and referenced for operation, maintenance
and troubleshooting.
This manual contains an overall description of the product, together with
all the necessary information for using the product correctly and safely. It
is highly recommended that this manual is read prior to any operation or
maintenance of this product. The safety precautions and warnings are to
ensure your safety and protect you from harm or damage to the product.
All photographs and drawings in this manual are supplied by Parker
Products Ltd. to help you with the operation and maintenance of the
product. The information contained in this manual was accurate at the time
of production, however Parker Products Ltd. may make modications to the
product without notication.
This Brush Cutter has been designed for blowing / vacuuming areas in
private house and hobby gardens.
The machine is to be used only for its prescribed purpose, any other
use is deemed to be a case of misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries of any kind caused as
a result of this.
Please note that our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty will be voided
if the machine is used in commercial, trade or industrial businesses or for
equivalent purposes.
Thank you
ParkerBrand
GENERAL SAFETY .......................................................................... 4-5 FLOODED ENGINE PROCEDURE................................................... 42
SAFETY SYMBOLS .......................................................................... 6-9 STOPPING THE ENGINE ................................................................ 43
FOR SAFE OPERATION .................................................................. 10-13 ADJUSTING THROTTLE CABLE & IDLING SPEED ....................... 44-45
WHAT'S IN THE BOX ....................................................................... 14-15 OPEN & REPLACE SPOOL LINE .................................................... 46-49
PRODUCT FEATURES .................................................................... 16-19 OPERATION ..................................................................................... 50-53
BEFORE USING THE BRUSH CUTTER ......................................... 20-21 TROUBLESHOOTING ...................................................................... 54-57
ASSEMBLY ....................................................................................... 22-27 ONLINE RESOURCE LIBRARY ....................................................... 58-59
INSTALLING 3 TOOTH BLADE (PLEASE READ CAREFULLY!)...... 28-31 MAINTENANCE & CARE ................................................................. 60-63
INSTALLING SPOOL ........................................................................ 32-33 SPECIFICATIONS ............................................................................ 66
WEARING THE HARNESS .............................................................. 34-36 GUARANTEE .................................................................................... 67
FILLING THE FUEL TANK ................................................................ 38-39 DECLARATION OF CONFORMITY ................................................. 69
STARTING THE ENGINE (PLEASE READ CAREFULLY!)............... 40-41
To Next Page
Loading...