6160
MAINTENANCE & CARE
MAINTENANCE & CARE
Before starting work
After nishing work or daily
After each refuelling stop
Weekly
Monthly
Yearly
If problem
If damaged
As required
ENGINE
Air Filter
Clean X X
Replace X
Manual fuel pump (if tted)
Check
Have repaired by servicing dealer
Pickup body in fuel tank
Check X
Replace X X X
Gearbox Lubrication
Check X X X
Replenish X
Before starting work
After nishing work or daily
After each refuelling stop
Weekly
Monthly
Yearly
If problem
If damaged
As required
ENGINE
Carburettor
Check idle adjustment – the cutting
attachment must not rotate
X X
Adjust idle speed X
Spark Plug
Readjust electrode gap X
Replace after every 100 operating hours
Cooling Inlets
Visual inspection X
Clean X
Fuel Tank Clean X X
Air Filter Clean X
Fuel Filter Clean X
To Next Page
Loading...