Parker PGBC-5200 - Wearing the Harness

1
3
2
34
4
6
5
35
Your harness is designed to be worn with the snap
buckle at the front.
The Multi Tool should hang on the right and rest
against the thigh pad.
The back plate should sit centrally on your back.
Adjust the harness so it is secured against your
body in the most comfortable position.
The harness is easily adjusted by utilizing the strap
adjusters.
Ensure the thigh pad is located in the correct
position so it protects you fully from pressure points
created from contact with the machine during use.
The thigh pad is normally positioned on the right
hand side, this is the same side that the machine
will be positioned.
The harness is fully adjustable with 8 strap adjusters
to ensure the best possible t. Be sure to evenly
spread the weight over both shoulders using the
strap adjusters.
Tighten or loosen the harness to best suit your
frame. Please be aware you may need to re-adjust
to ensure the harness is in the most comfortable
position to suit you.
Lock the snap buckle to secure the harness loosely
in place
Place the Harness over your head ensuring that
the padded shoulder straps are placed on to your
shoulders.
Included with your PGBC-5200 is the harness. The
harness ensures you can work both safely and
comfortably whilst using your machine.
It features padded straps for extra comfort,
protective thigh pad, fully adjutable straps and a
quick release hook.
WEARING THE HARNESS
FRONT VIEW & REAR VIEWTHIGH PADADJUST TO FITSNAP BUCKLEPLACE OVER HEADTHE HARNESS
WEARING THE HARNESS
• For your own safety, comfort and for best results always use the PGBC-5200 with the harness provided
CAUTION!