37
36
THIS PAGE HAS INTENTIONALLY BEEN LEFT BLANK
Easily attach and release the machine from the
harness using the quick release hook.
To release the unit from the hook pull the orange
tab.upwards.
Please make sure the machine is properly secured
or supported before releasing the quick release
hook to prevent damage.
9
87
Place the release pin through the slot in the upper
hook making sure that the pin passes over the
lower hook.
The quick release hook is now re-assembled and
ready to be used again when needed.
After use of the quick release hook it will need to be
re-assembled.
Place the lower hook over the upper hook with
orange tab attached.
INSERT RELEASE PINREPLACE LOWER HOOKQUICK RELEASE HOOK
WEARING THE HARNESS
• Ensure engine is turned off before using the quick release hook
• Before using quick release hook place machine on a solid surface, dropping the machine will cause damage to the unit.
WARNING!
To Next Page
Loading...