26 GB
11. Enter the pause time setting
21
will be flashing at the same time.
Press the button
5
to enter. Turn the rotary control
6
to set the pause
interval (maximum 19 minutes) (for example 17 minutes) (see Fig. E9).
Press the button
5
to confirm.
Remark: For example, if the start time is 6:20, the total watering time is
1 hrs 5 mins, the watering interval is 18 mins, pause time is 17 mins. When
time reaches 6:20, the product will start watering for 18 mins, then pause
f
or 17 mins, then restart after 18 mins and then pause for 12 mins. Normally
the program should pause for17 mins, but since adding pause for 12 mins makes
the total time reach 1 hrs 5 mins., the program will be ended. If you do not
want to set the interval time and pause time, just set both to 0 min.
12. Enter the watering schedule ON/OFF setting. Turn the rotary control
6
to
select
19
or
22
. Press the button
5
to confirm and return to
normal display mode.
Remark: When you use the rotary control
6
to select the program with the
current watering program (1‒6)
18
flashing, you can press the button
4
to turn the program on or off directly without setting the other parameters.
To Next Page
Loading...
