Parkside PBS 2 C3 - General Safety Information; Symbols on the Equipment

34
GB IE
Symbols on the Equipment
On the equipment, there are information
symbols. These convey important informa-
tion about the product or information about
its use.
• Caution: Special safety measures are
required when handing the equipment!
• The entire operating instructions must
be read and understood before use.
Non-observance of the operating in-
structions may be fatal!
Attention!
Read the operating instructions
carefully before using the equip-
ment.
Wear eye protection.
Wear head protection.
Wear ear protection.
Wear protective gloves.
Risk of injury from cuts.
Wear non-slip safety shoes with
rm soles.
Maintain a safety
distance of min. 15
m from others.
Danger from parts being thrown
out! Keep away from other
people.
Caution! Hot surfaces –
risk of burns!
Attention! Kickback - be aware
that you may experience kick-
back while working with the
machine.
Do not use any circular- or multi-
toothed saw blades!
Risk of injury.
dB
L
WA
Specication of the guaranteed
sound power level L
WA
in dB.
50:1
Mix ratio 50:1,
Use ONLY fuel mix
Open ames, re,
open ignition sources
and smoking are pro-
hibited.
Use ONLY
fuel mix
4.
3-4x
2. 3.1.
Start-up Sequence
General Safety Information
Do not allow access by children or by peo-
ple who are ill or inrm. Children must be
carefully supervised when they are in the
area of machinery. Observe the regional
and local accident prevention regulations
applicable where you are. The same ap-
plies for all regulations concerning occupa-
tional safety and health in the workplace.
The manufacturer cannot be held liable if
the machines produced by the same are
modied without permission and if dam-