EasyManua.ls Logo

Parkside PNTS 23 E - User Manual

Parkside PNTS 23 E
46 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WET AND DRY
VACUUM CLEANER
VÅT- OCH TORRDAMMSUGARE
Bruksanvisning och säkerhetsanvisningar
VÅD- OG TØRSUGER
Brugs- og sikkerhedsanvisninger
ΗΛΕΚΤΡΙΚΗ ΣΚΟΥΠΑ ΞΗΡΟΥ
ΚΑΙ ΥΓΡΟΥ ΚΑΘΑΡΙΣΜΟΥ
Υποδείξεις χειρισμού και ασφαλείας
MÄRKÄ- JA KUIVAIMURI
Käyttö- ja turvaohjeet
WET AND DRY VACUUM CLEANER
Operation and Safety Notes
3
NASS- UND TROCKENSAUGER
Bedienungs- und Sicherheitshinweise
PNTS 23 E
36613_Nass-und Trockensauger_Cover_LB3.indd 2 18.06.09 11:53

Table of Contents

Questions and Answers

  • J
    John RussellAug 9, 2025
    Why does my Parkside Vacuum Cleaner have low suction?
    • G
      George LyonsAug 9, 2025
      If your Parkside Vacuum Cleaner has low or no suction, first check for blockages in the hose system or jets and remove any obstructions. Make sure the suction pipes are assembled correctly and that the container is properly closed. Also, ensure the container isn't full; if it is, empty it. Finally, the filter may be full or clogged, so empty, clean, or replace the filter.
  • H
    hbishopAug 23, 2025
    How to fix a Parkside Vacuum Cleaner that won't start?
    • J
      Joshua MeyersAug 25, 2025
      If your Parkside Vacuum Cleaner won't start, begin by checking the plug socket, cable, line, plug, and fuse to ensure mains voltage is present. If there are issues, have them repaired by an electrical specialist. A defective on/off switch can also cause this problem; it should be repaired by customer service.

Parkside PNTS 23 E Specifications

General IconGeneral
BrandParkside
ModelPNTS 23 E
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals