10
GB IE CY
471-958-240709
Disposal/Environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling cen-
tre when you have fi nished with them.
Machines must not be disposed of with
household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on for
recycling. Contact our Service Centre for
more details.
Trouble shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage is not
present
Check plug socket, cable, line,
plug and fuse, where appropriate,
repair through electrical specialist
Defective on/off switch
Repair through customer service
Worn carbon brushes
Defective motor
Low or lack of suction
Hose system or jets blocked Remove obstructions and blockages
Suction pipes assembled
incorrectly
Assemble suction pipes correctly
Container open Close container
Container full Empty container
Filter full or clogged Empty, clean or replace fi lter
Technical data
Power consumption of motor .............. 1400 W
Mains voltage ........................... 230 V~, 50 Hz
Safety class ...............................................
II
Protection category ..................................IP24
Suction force .....................16 kPA, 2.2 m
3
/min
Cable length .............................................. 4 m
Stainless steel container
capacity (brutto) .......23 l
Useful container volume ...................................15 l
Weight (incl. all accessories) ................. 6.5 kg
Technical and visual modifi cations may be
carried out due to further development with-
out prior notice. All dimensions, information
and statements provided in these Operating
Instructions are therefore subject to amend-
ment. Legal claims which are based on the
Operating Instructions can therefore not be
recognised.
To Next Page
Loading...
