31
• Always carry the device by the handle
(4).
Cleaning, maintenance
and storage
WARNING! Electric shock! Risk of in-
jury due to unintentional start-up. Protect
yourself when performing maintenance or
cleaning work. Switch off the device and
disconnect the mains plug from the socket.
You should have any repair and mainten-
ance work that is not described in these
instructions carried out by our Service
Centre. Only use original replacement
parts.
Cleaning
WARNING! Electric shock! Never
spray down the device with water.
NOTICE! Risk of damage. Chemical sub-
stances may attack the plastic parts of the
machine. Do not use any cleaning agents
or solvents.
• Keep the ventilation slits, motor housing
and handles of the machine clean. Use
a damp cloth or brush to do this.
Maintenance
The device is maintenance free.
Storage
Always store the device and accessories:
• clean
• dry
• protected against dust
• out of the reach of children
Troubleshooting
The following table will assist you in fixing faults:
ProblemPossible causeError correction
No mains power supplyCheck the socket, mains con-
nection cable, plug and fuse
and have them repaired by a
qualified electrician if neces-
sary.
On/Off switch (3) is brokencontact the service centre.
Device does not start
Defective motorcontact the service centre.
Internal loose contactcontact the service centre.Device works with interrup-
tions
On/Off switch (3) is brokencontact the service centre.
Saw blade (17) unsuitable
for the workpiece to be pro-
cessed
Use a suitable saw blade
(17)
Saw blade (17) bluntUse a new saw blade (17)
Poor sawing performance
Incorrect sawing speedAdjust sawing speed
To Next Page
Loading...
