Parkside PSTD 800 E4 - Translation of the Original EC Declaration of Conformity

GB
MT
35
Translation of the original EC declaration of
conformity
Product: Jigsaw
Model: PSTD 800 E4
Serial number: 000001–110000
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2006/42/EC • 2014/30/EU • 2011/65/EU &(EU)2015/863
The object of the declaration described above is in conformity with Directive
2011/65/EU of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and electronic
equipment.
To ensure conformity, the following harmonised standards and national standards and
regulations have been applied:
EN 62841-1:2015/A11:2022 •EN 62841-2-11:2016/A1:2020
EN IEC 63000:2018 •EN IEC 55014-1:2021 •EN IEC 55014-2:2021
EN IEC 61000-3-2:2019/A1:2021 •EN 61000-3-3:2013/A2:2021
IEC 62471:2006 •EN62471:2008
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Str. 20
63762 Großostheim
GERMANY
15.03.2024
Christian Frank
Authorised representative of documentation