13Installation
when connected to the electronic box.
To supply power with a battery:
1. Remove the circular plastic part on the back of the remote by turning it clockwise.
2. Insert a 3V CR2032 battery into the remote control. Make sure the battery is
correctly positioned.
3. Put the circular plastic part back by turning it counterclockwise.
To connect the remote control to the electronic box :
1. Remove the circular plastic part on the back of the remote by turning it clockwise.
2. Connect the remote control cable into the battery compartment and turn it
counterclockwise.
3. Connect the remote control cable to the electronic box, next to the USB
connectors.
Note : To check the remote control battery level, select Settings > Advanced settings >
Remote.
Note : The Parrot ASTEROID Mini remote control can be updated when connected via the
remote control cable. Refer to the Parrot ASTEROID Mini software update procedure for
more information.
To Next Page
Loading...
