12
Installation
Stick the support on the dashboard.
select the support location carefully: once stuck, it will be difficult to change it
without affecting the fixation quality ;
clean the area with an appropriate cleaning product before sticking the support ;
once you have stuck the support on the dashboard, wait for approximately 2 hours
without handling it.
Remember to remove your screen when leaving the vehicle to avoid tempting any
would-be thieves and to prevent prolonged exposure to sunlight.
Installing the remote control
Stick the remote control support on your dashboard. To do so, use the adhesive tape
located under the support.
select the support location carefully: once stuck, it will be difficult to change it
without affecting the fixation quality ;
clean the area with an appropriate cleaning product before sticking the support ;
once you have stuck the support on the dashboard, wait for approximately 2 hours
without handling it.
There are two ways to supply power to the remote control : with a battery or by
connecting it to the electronic box. The buttons on the remote control are backlit
To Next Page
Loading...
Need help?
General
Weight and Dimensions
