23Internet
Internet
Connecting a 3G / 4G key
Note: Refer to the compatibility section of the Parrot ASTEROID Mini on our website to get
the list of 3G / 4G keys compatible with the Parrot ASTEROID Mini.
Note : To guarantee an optimal reception quality we recommend you do not connect your
internet USB key 3G on the Parrot ASTEROID directly : use the USB cable to install your
device on the dashboard (or any other open area).
1. Connect a 3G key to the Parrot ASTEROID Mini using a USB cable.
2. Select OK to activate the 3G connection.
3. Enter your PIN code using the jog wheel (if required), then select OK.
4. Select your APN (Access Point Name) from the suggested list. This information is
available in the documentation provided with your 3G key.
Note : If your APN is not in the list, you can add it by selecting Settings > Network > USB
modem > Configuration.
5. Wait approximately 30 seconds until the connection is established.
Sharing a phone 3G connection via Bluetooth
Note: Refer to the compatibility page of our website to check if your phone allows 3G
connection sharing via Bluetooth and to consult the corresponding procedure :
www.parrot.com/uk/compatibility.
If you have a phone that supports the DUN (Dial-Up Networking) or PAN (Personal
Area Network)
Bluetooth
profiles, the
Bluetooth
connecting your phone to the Parrot
ASTEROID Mini will allow for sharing of the phone's 3G connection.
1. Make sure the
Bluetooth
sharing option is activated. To do so, select Settings >
Network > Bluetooth sharing > Activate.
2. Allow connection sharing on your phone. This procedure will vary according to
your phone model.
3. Connect your phone to the Parrot ASTEROID Mini via
Bluetooth
.
4. If necessary, select your APN (Access Point Name) from the suggested list.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
