Parrot ASTEROID MINI User Guide

6
Installation
Installation
Note: We advise our customers to have the Parrot ASTEROID Mini fitted by a certified
Parrot installer.
Before you begin
Warning : Use only the ISO cable provided with the Parrot ASTEROID Mini.
Installing the Parrot ASTEROID Mini is done by inserting it between the car stereo and
the vehicles speaker system.
Note: If your car stereo is not fitted with ISO connectors, you need to purchase an ISO
adapter cable to simplify the wiring procedure. Refer to the Vehicle compatibility section
on the Parrot ASTEROID Mini support page to check whether an ISO adapter is necessary on
your vehicle.
Start by removing the car stereo from your vehicle. You may need release keys to do so.
Refer to your car stereo’s wiring diagram.
Before you install the individual components, check that the installation locations
have been selected in such a way that the cable length is sufficient to connect every
element. Once the installation is complete, make sure that no cables are pinched or
trapped.
Use only the ISO cable provided with the Parrot ASTEROID Mini.
The connection number indications in the next sections correspond to the
connections represented on the installation diagrams.

Parrot ASTEROID MINI Specifications

General

Display diagonal	3.2 \
Product color	Black
USB direct playback	Yes
Audio formats supported	AAC, MP3, OGG, WAV, WMA
Compatible memory cards	SD, SDHC

Weight and Dimensions

Weight	60 g