Parrot ASTEROID MINI User Guide

7Installation
Installation diagram
ISO installation
Connecting the audio cable
Join the vehicle audio cable to the connector of the Parrot ASTEROID Mini
(Connections 1A and 2).
If your vehicle is equipped with an amplifier, refer to the Installation with external
amplifier section.
Connecting the power cable
Always check all connections first with appropriate test equipment before connecting
any cable to the vehicle.
1. Connect the ISO male connectors of the Parrot ASTEROID Mini to the car stereo
(Connection 3).
2. Join the vehicle’s power supply cable to the ISO female connector of the Parrot
ASTEROID Mini (Connection 4).
The red wire of the Parrot ASTEROID Mini cable must correspond to the
constant +12V supply, the orange wire to the ignition +12V and the black wire to

Parrot ASTEROID MINI Specifications

General

Display diagonal	3.2 \
Product color	Black
USB direct playback	Yes
Audio formats supported	AAC, MP3, OGG, WAV, WMA
Compatible memory cards	SD, SDHC

Weight and Dimensions

Weight	60 g