16
PAIRING WITH PANASONIC X70
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
Parrot CK3000. Once this is done, connection between your telephone and your hands-free kit will take place automatically
as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is
established.
Procedure :
Switch on your phone, turn the key in the car ignition and two indicator lights on the keypad should light up to indicate your
hands-free is powered up. Now carry out the following sequence on your phone.
Access the Menu and select “Organizer", press "Select".
Go to “Connect” and press “Select”.
Enter “Bluetooth®” menu.
Then enter “On/Off” menu.
Select “On” if it is not selected yet.
Get back to the “Bluetooth®” menu by pressing ç.
Select “Discover & Pair”
When the search is finished, select “Parrot CK v…”. Press “Pair”.
The display reads, "Bluetooth® passkey", enter 1234 then " OK".
LEARNING NAMES
Before assigning voice tags to names, you must activate the Voice Dialing on your phone.
Enter the menu and select “Contacts List”.
Enter “Settings” ands select “Voice Dial”.
Select “On” if it is not selected yet.
To assign a voice tag to a name, enter the menu and select “Contacts List”.
Enter “Voice Dial” and press « Menu »
Select “Add”
Find the desired name and click on "Menu", then "Recall".
The following message is displayed: “Please Record Your Voice !".
Press “Ok”. The phone displays “Voice Dial Recording”. Say the name.
After you said the name, “Please Record Your Voice Again !” is displayed.
Press “Ok” and say the name again.
If the recording succeeds, the phone displays “Voice Dial Set”. If not, the phone will ask you to say the name again.
To remove the voice tag for any name, access the menu and select “Contacts List”
Enter the “Voice Dial” menu and select the name.
Press “Menu”
By clicking "Play", you can listen to the voice tag.
By clicking "Delete", you will delete the voice tag.
COMMUNICATING
Making a call using the voice recognition:
Before using the voice recognition, make sure it is activated in your phone and voice tags are recorded.
(see “Learning names” for more information)
l Press the green button and wait for the tone, then say the name of the person you want to call.
Example: press green button, [beep], Nicholas.
Making a call manually:
Use the phone keypad to dial the number. When the call is started, press the green button on the CK3000
keypad to switch the call in hands-free mode.
To Next Page
Loading...
Need help?
General
