Parsun F2.6BM User Manual

CAUTION:
 If the choke knob is left pulled out after the engine starts, the engine will stall.
 In the temperatures of -5
℃ or less
seconds after starting.
2. Check for steady flow of water from the cooling water pilot hole.
CAUTION:
 If water is not flowing out of the hole at all times while the engine is running, stop the engine
and check whether the cooling water inlet on the lower case or the cooling water pilot hole is
blocked.
 If the problem cannot be located and corrected, consult your PARSUN dealer.
17

Parsun F2.6BM Specifications

General

Brand	Parsun
Model	F2.6BM
Category	Outboard Motor
Language	English