EasyManuals Logo

Parsun F2.6BM User Manual

Parsun F2.6BM
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
6. Pull the manual starter handle slowly until you feel resistance. Then give a strong pull straight to crank
and start the engine. Repeat if necessary.
7. After the engine starts, slowly return the manual starter handle to its original position before releasing it.
8. Slowly return the throttle grip to the fully closed position.
CAUTION:
When the engine is cold, it needs to be warmed up.
If the engine does not start on the first try, repeat the procedure. If the engine fails to start after
4 or 5 tries, open the throttle a small amount (between 1/8 and 1/4), and try again.
2.6 Warming up engine
1. After starting the engine, return the choke knob to the halfway position. For approximately the first 5
minutes after starting, warm up the engine by operating at one fifth throttle or less. After the engine has
warmed up, push the choke knob in fully.
16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parsun F2.6BM and is the answer not in the manual?

Parsun F2.6BM Specifications

General IconGeneral
BrandParsun
ModelF2.6BM
CategoryOutboard Motor
LanguageEnglish

Related product manuals