750w² Monitor Instruction Manual
6 Recorded Data
The recorded data function allows 750w² monitor display
access to the saved snapshot sensor readings recorded by
pressing the OK key in ‘Measure Mode’. (Figure 25)
Each individual record consists of (Figure 26):
DATE / TIME
MEASUREMENT TITLE
VALUE / UNITS .
The records are displayed with the newest first (at the
bottom of the display). Using the keys will scroll through the records.
6.1 Data via USB
When the 750w² Monitor is plugged into a PC it will appear like a USB memory drive
named “750w2” with a folder “DataRecordings”.
Inside this folder will be a CSV file named “DataRecordings”, this is a file that combines
all the recorded data and is used for data display on the monitor. Editing this file may
corrupt your data.
The folder will also have files that are specific to each sensor that is used, it is
advisable to copy this file to your desktop before using it to import that data into a
spreadsheet for analysis.
228538IM Issue 09 Date 20/01/2020 Page 13 of 20
To Next Page
Loading...
General