750w² Monitor Instruction Manual
3 Configuration Structure
3.1 Menu Mode
To access the main menu, press the MENU key
when the monitor is in measure mode (Figure 6).
Pressing the MENU key when the main menu is
displayed will return the monitor to the measure
mode.
When the main menu is displayed, the keys can be used to move the
selection bar.
Pressing the OK key will activate the selected item.
If the monitor is left in any display other than measure mode, it will automatically
return to measure mode after 1 minute has passed with no key presses.
When a sub menu is displayed, pressing the MENU key will exit the current menu
and return to the previous menu.
If a menu consists of more than five lines a scroll bar will appear, items “off-
screen” can be accessed using the UP and DOWN arrows.
3.2 Configuration – Use of Keys
The 750w² uses three methods of data entry for the setting of user configurable
parameters:
3.2.1 User List Selection (Figure 7)
Used to select from a list of options such as sensor
type, display range and backlight mode.
The list of possible selections will be displayed and a
small asterisk will identify the current setting.
To make a selection, the selector bar can be moved
using the keys, to select the required item.
Pressing the OK key will select the highlighted item.
Pressing the MENU key will exit the list selection menu.
Page 8 of 20 228538IM Issue 09 Issue Date 20/01/2020
Figure 6
Figure 7: List Selection
To Next Page
Loading...
General