750w² Monitor Instruction Manual
2 Basic Operation
2.1 Power On/Off
The 750w² Monitor can be turned on and off using the ON/OFF key. When the
monitor is turned on it enters the Measure Mode; (Figure3). The instrument can
be switched off at any time by pressing the ON/OFF key.
With no sensor plugged in, the status bar will display
‘NO SENSOR’ (Figure 7).
2.2 Measure Mode
The normal operating mode for the 750w² Monitor is
measure mode when this is active the measured
value is displayed in large numbers.
The display in measure mode also includes a status
bar that displays the status of the battery, and details
of the instrument settings.
Pressing the OK key in ‘Measure Mode’ will save the
current sensor reading, time and date stamped. The
status bar will briefly display “Saving” (Figure 5).
Any sensor readings saved using this method will be
accessible either as a file upload using the USB lead,
or viewed on the display within “Recorded Data”
Menu.
228538IM Issue 09 Date 20/01/2020 Page 7 of 20
To Next Page
Loading...
General